We install fences across Cedar Park, from Ranch at Brushy Creek and Buttercup Creek to the hillside builds in Twin Creeks and Avery Ranch, plus neighboring Leander and Round Rock. Cedar Park has more than 70 active HOAs, and we’ve cleared architectural review submissions with the design committees of Ranch at Brushy Creek, Twin Creeks, Reserve at Brushy Creek, and Cypress Canyon. Since 2008: 18 years of Austin metro fence work, 134 verified Google reviews, BBB A+ rated, and a written 1-year warranty on every installation. Fully insured on every job. Book a Cedar Park site visit or call (512) 900-5735.
Request an Estimate
About Fencing in Cedar Park
Cedar Park sits 21 miles north of downtown Austin in Williamson County, bordered by Leander to the west and Round Rock to the east. The city grew rapidly during the 2010s tech boom and today encompasses more than 70 distinct neighborhoods, with a population approaching 85,000. Most of Cedar Park is served by Leander ISD, though some Brushy Creek homes fall under Round Rock ISD. What defines fence work here is HOA density: around 80 to 85 percent of Cedar Park homes are in an active HOA.
The Ranch at Brushy Creek covers a large planned community between Highway 183 and I-35. Twin Creeks Country Club sits on 760 acres of hillside terrain around a Fred Couples-designed golf course. Reserve at Brushy Creek is the higher-end master community. Buttercup Creek, Avery Ranch, Cypress Canyon, Anderson Mill Estates, and Carriage Hills round out the primary HOA subdivisions. The ground beneath all of it is mostly clay loam, transitioning to rocky hillside conditions in Twin Creeks and Avery Ranch. Almost every Cedar Park fence project starts with an ARC submission.
Fence Services in Cedar Park
HOA-Approved Cedar Privacy Fencing
Cedar’s the near-universal choice in Cedar Park because almost every HOA (Ranch at Brushy Creek, Twin Creeks, Buttercup Creek, Cypress Canyon) mandates cedar with approved stain colors. Board-on-board cedar at 6 feet with cap rails is what most Cedar Park HOAs approve. Our HOA-approved cedar work in Cedar Park runs 150 to 200 feet on typical Ranch at Brushy Creek or Buttercup Creek lots, and we’ll handle the stain application in HOA-approved colors as part of the project.
Cedar with Aluminum Pool Sections
Many Cedar Park lots have pools, and Texas law requires pool fencing at a minimum 48 inches with self-closing, self-latching gates. Combining cedar backyard privacy with a 4-foot aluminum pool section on the side yard is a common Cedar Park configuration. See our cedar and wood privacy panels.
Wrought Iron Front-Facing Accents
Reserve at Brushy Creek and Twin Creeks approve wrought iron for front-facing corners and pool safety. Powder-coated black or bronze holds up in Central Texas sun without rust. HOA specs call out post spacing, picket dimensions, and finish colors, which we match on the ARC submission. Our iron fence installations in Cedar Park typically combine with cedar back sections.
Chain Link (Limited Cedar Park Applications)
Chain link’s rarely approved in Cedar Park HOAs, but exceptions exist: temporary construction fencing during new builds, side-yard dog runs on non-street-facing sections, and some Anderson Mill Estates properties without active HOA restrictions. Our chain-link security fencing covers those specific use cases when the HOA design permits.
Custom Gates and Pool Enclosures
Standard walk gates come with every Cedar Park privacy install. For pool areas, we install self-closing, self-latching aluminum gates that meet Texas pool code. For larger driveway entrances in Reserve at Brushy Creek, we install both manual and automated systems. Our walk gate and drive gate services cover the full range.
Our Cedar Park Installation Process
Our Cedar Park process is built around one factor that dominates everything else here: HOA architectural review. Every step is tuned to clear ARC on first submission and keep the project moving.
Step 1: On-site estimate and HOA identification. We’ll measure your property, discuss material and stain options, identify your specific HOA (with 70+ Cedar Park HOAs, this matters), and walk the terrain to check for clay expansion zones vs hillside sections. Written itemized estimate within 48 hours.
Step 2: HOA ARC submission package. We’ll prepare the architectural review submission (material specs, stain color samples, layout drawings, cover letter) and submit it to your HOA on your behalf. Ranch at Brushy Creek runs a 2 to 3-week review cycle. Twin Creeks runs closer to 4 weeks.
Step 3: Material sourcing and stain preparation. Western Red Cedar for the primary material. HOA-approved stain color prepared in advance. Aluminum panels ordered for pool sections. Wrought iron sections fabricated to ARC spec for Reserve at Brushy Creek and Twin Creeks.
Step 4: Installation tuned to your subdivision. Ranch at Brushy Creek clay lots get 3-foot post depth with concrete collars. Twin Creeks hillside lots get alignment attention that flat-land installs don’t need. Reserve at Brushy Creek premium projects often involve mixed cedar-iron sections. We’ll typically complete a standard 180-foot Cedar Park install in 1 to 3 days.
Step 5: Final walkthrough, stain application, and HOA sign-off. We’ll test the gate operation, verify the plumbing, apply the HOA-approved stain, complete the site cleanup, and hand off your workmanship warranty in writing. Standard Cedar Park HOA projects run 3 to 5 weeks total from estimate to walkthrough, including ARC time.
Why Cedar Park Homeowners Choose Austin Fence Company
Cedar Park’s a mature suburban market with a deep pool of contractors. What Cedar Park homeowners tell us: they’d rather have the contractor whose ARC submission clears on first review than the cheapest bidder. A first-submission ARC approval saves 4 to 8 weeks compared to a rejection cycle. That’s what our 18-year track record and named committee experience delivers.
- Since 2008: 18 years serving the Austin metro
- 134 verified Google reviews averaging 4.9 stars
- Written 1-year warranty on every installation
- BBB A+ rated
- Insured crews and vehicles (general liability + workers’ comp)
- Familiar with the Ranch at Brushy Creek, Twin Creeks, Reserve at Brushy Creek, and Cypress Canyon ARC processes
- Clay-expansion post depth technique on Brushy Creek subdivisions; hillside alignment technique on Twin Creeks and Avery Ranch
- Same-day callback on all inquiries, written itemized estimates within 48 hours
Fence Cost in Cedar Park
Cedar Park pricing runs higher than Austin metro averages because HOA-mandated Western Red Cedar and stain treatments add per-foot cost. Standard cedar sits below Western Red Cedar in the per-foot range; wrought iron sections add cost above standard cedar. For per-foot pricing by material and typical Cedar Park project totals, see our full Cedar Park cost breakdown by material.
Frequently Asked Questions
Do you serve Ranch at Brushy Creek in Cedar Park?
Yes. We install fences across all major Cedar Park neighborhoods, including Ranch at Brushy Creek, Twin Creeks, Reserve at Brushy Creek, Buttercup Creek, Avery Ranch, Cypress Canyon, and Anderson Mill Estates. For Ranch at Brushy Creek specifically, we’re familiar with the HOA architectural review process, and we’ll prepare the ARC submission package as part of the estimate.
What fence material works best in Cedar Park?
Western Red Cedar privacy is the near-universal answer for Cedar Park because most HOAs (Ranch at Brushy Creek, Twin Creeks, Buttercup Creek, Cypress Canyon) mandate cedar with approved stain colors. Board-on-board cedar at 6 feet with cap rails is what most Cedar Park HOAs approve. In Reserve at Brushy Creek or Twin Creeks, we often install front sections combining cedar and wrought iron. Chain links are rarely approved in Cedar Park subdivisions.
How long does fence installation take in Cedar Park?
Plan on 3 to 5 weeks total for a standard Cedar Park HOA project. HOA architectural review typically runs 2 to 4 weeks (Twin Creeks and Ranch at Brushy Creek both have monthly committee cycles). The install itself runs 1 to 3 days. Non-HOA properties in older Anderson Mill Estates install within 1 to 2 weeks of estimate approval.
Do I need a permit for a fence in Cedar Park?
Depends on your project. Standard backyard fences 6 feet or under don’t require a city permit. Front-yard fences over 3 feet may need permit review. Fences over 6 feet or in special zones require a permit from the City of Cedar Park Building Department. Contact the City of Cedar Park Building Department. HOA architectural approvals are separate.
Do you handle HOA architectural review submissions?
Yes, and it’s our Cedar Park specialty. We prepare the ARC submission package, including material specifications, stain color samples, height and layout drawings, and a cover letter, and we’ll submit it to your HOA on your behalf. We’ve cleared submissions with Ranch at Brushy Creek, Twin Creeks, Reserve at Brushy Creek, Cypress Canyon, and other Cedar Park committees.
Get a Free Cedar Park Fence Estimate
Ready to talk about a Cedar Park fence project? We provide free, on-site estimates with written itemized quotes within 48 hours, and we’ll handle the ARC submission as part of the estimate. We’re set up for Ranch at Brushy Creek cedar builds, Twin Creeks premium projects, and Reserve at Brushy Creek cedar-iron combinations. Request your free Cedar Park fence estimate or call (512) 900-5735.
